|
DSpace at Transilvania University >
Mechanical Engineering >
COMEC 2009 >
Please use this identifier to cite or link to this item:
http://hdl.handle.net/123456789/1025
|
| Title: | TENSILE AND BENDING TESTS ON 63 x 4 HIGH DENSITY POLYETHYLENE TUBES |
| Authors: | SCARLATESCU, D
GOIA, I
TEODORESCU-DRAGHICESCU, H |
| Keywords: | tensile, bending, HDPE, stress, strain) |
| Issue Date: | 2009 |
| Publisher: | Transilvania University Press of Braşov |
| Citation: | Google Scholar |
| Series/Report no.: | COMEC 2009;278-282 |
| Abstract: | The paper presents the most important results obtained during tensile tests carried out on high density polyethylene
(HDPE) specimens as well as three-point bend tests accomplished on 63 x 4 HDPE tubes used for water supply networks. At tensile
tests, the force range is between 680 N and 790 N and extensions are up to 21 mm, stresses are between 18 MPa and 23 MPa and
strains are up to 0.41. Three-point bend tests revealed bend forces between 1700 N and 2000 N, extensions up to 110 mm, maximum
bending stresses between 3.2 MPa and 3.8 MPa and maximum bending strains up to 6.5. |
| URI: | http://hdl.handle.net/123456789/1025 |
| ISBN: | 978-973-598-572-1 |
| Appears in Collections: | COMEC 2009
|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
|
