|
DSpace at Transilvania University >
Mechanical Engineering >
COMAT 2018 >
Please use this identifier to cite or link to this item:
http://hdl.handle.net/123456789/2312
|
| Title: | COMPARISON BETWEEN THE MECHANICAL PROPERTIES OF CLASSIC POLYETHYLENE TUBES AND COMPOSITE POLYETHYLENE TUBES |
| Authors: | Chircan, Eliza
Dimitriu, Ștefan |
| Keywords: | polyethylene
fibreglass
circumferential direction
pressure |
| Issue Date: | Oct-2018 |
| Publisher: | TRANSILVANIA UNIVERSITY PRESS OF BRAȘOV |
| Citation: | http://scholar.google.ro/ |
| Series/Report no.: | COMAT 2018;190-193 |
| Abstract: | Polyethylene piping industry has a known in the past couple of years, an important growth. The usage of this kind of pipes is widely spreader through various areas, such as water supplying, heating and so on. One of the major issues with this kind of tubes is the burst of material, caused by in tube pressure. To improve its behaviour, to the polyethylene tube was added a fibreglass coating. This procedure insures higher proprieties that allow the tube to be used at higher pressure points. In the following paper we will compare the normal polyethylene tube with the composite one, using as reference the circumferential proprieties of the tubes. |
| URI: | http://hdl.handle.net/123456789/2312 |
| ISSN: | 2457-8541 |
| Appears in Collections: | COMAT 2018
|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
|
